Para Octyl Phenol

Technical Data : Test

Test Method

Specification

Appearance

Visual

Solid flakes

Colour (molten), HU, (max.)

QAS-W-006 Eq. to ASTM D-1209

50

Melting point,^oC, (min.)

QAS-W-017

82.0

Purity, percent by mass, (min.)

QAS-W-160 (G.C. Method)

98.5

Phenol, percent by mass, (max.)

QAS-W-160 (G.C. Method)

0.10

Water content, percent by mass, (max.)

QAS-W-009 Eq. to ASTM D- 1364

0.10

Characteristic Data : Test

Test Method

Typical Value

Hydroxyl value, mg KOH/gm

QAS-W-202 (Auto Titrator Method)

270

Note: Characteristic data provides further information about the product and is not subject to constant monitoring. Technical data are specification values and are subject to constant monitoring.

Application Para Octyl Phenol (POP) is mainly used in the manufacture of POP-ethylene oxide condensates and POP-formaldehyde resins. POP-ethylene oxide condensates are widely used as textile auxiliaries, wetting agents, emulsifiers for pesticides, detergents and non-ionic surface active agents etc. On further treatment with inorganic acids, these condensates give anionic surfactants. POP-formaldehyde reisns (Novolak Type), are used as tackifiers for synthetic rubber particularly in the tyre and adhesive industries. As heat reactive resins (Resole Type), they are suitable for curing of butyl rubber and they are also compatible with NR, ABS, & polychloroprene elastomers etc. POP- formaldehyde reisns are used in the manufacture of oil soluble resins for surface coating applications, special printing inks, brake & clutch linings etc.

Packing 25 kgs nett in Polyethylene bags. UN Classification Class : 8 UN No. : 3145 We pack 720 bags in a 20 ft container equivalent to 18 MT nett Para Octyl Phenol (POP) in 1 FCl for NOTE: Although the information given in this technilet on applications is accurate to the best of our knowledge, no liability can be accepted in respect of such information and no warranties or conditions are intended in respect of the product described.